Toilet Paper Holder, esLife Suction Stainless Steel Vacuum Suction Cup Holder for Bathroom

$3.99

  • Advanced Vacuum Suction Design Makes It Easy To Install Or Remove Without Drill And Screw, Gives More Convenience In Your Life.

  • Make Of Durable Stainless Steel To Avoid Rusting, ABS Plastic Suction Cup Stay The Holder Suctioned.

  • The Hook Of Toilet Holder Is 360° Rotatable To Choose Your Prefer Angle.

  • Gift One 3M Adhesive Tape To Use When Not Fit For Vacuum.

  • Attention: The Suction Paper Holder Must Work On Smooth Surface, If The Surface Is Not Fit For Vacuum, Please Use The Accessary 3M Adhesive Tape Firstly And Then Use The Holder In It. If the surface is not smooth Please Order Deliberately.

Buy at Amazon.com

Out of stock

Add to Wishlist
Add to Wishlist
Category: SKU: HG3112

Description

Vacuum Suction Design Makes Your Life More Convenience

esLife toilet paper holder adopts advanced vacuum suction design to install without any tools. No drills, no screws, keep your wall away from hole. You’ll also not bother for bring or removing the holder when make a move. Just pull the small wafer beside the suction pad simply, and it’s easy to remove and relocate as you prefer.[vc_row][vc_column width=”1/3″][vc_single_image image=”37101″ img_size=”medium”][vc_column width=”2/3″]Gift 3M Adhesive Tape To Suit Most Surface

When use the vacuum suction toilet paper holder, the surface must be smooth to install. If the surface is uneven, please use the gift 3M adhesive tape on the surface firstly, then install the holder in the smooth tape. It fits to work on wood such as your cupboard.[vc_row][vc_column width=”1/3″][vc_single_image image=”37087″ img_size=”medium”][vc_column width=”2/3″]360°Rotatable Hook Meets Your Need

This esLife toilet paper holder has another advantage which the hook of holder designs to be 360°rotatable, you can adjust your favorite angle. And if the holder doesn’t press firmly, the red warming ring will come out to remind. You can strengthen to avoid the holder falling off.[vc_row][vc_column width=”1/3″][vc_single_image image=”37080″ img_size=”medium”][vc_column width=”2/3″]Instruction:

When in smooth surface
1. Clean both the wall and the base of holder, and keep the surface dry without anything
2. Clean the suction pad, put it in location, push and press the central button until the red warming ring disappears, then the holder will be stick firmly on the wall.
When the surface unfit for vacuum
1. Clean the surface and keep dry, then stick the 3M tape
2. Stick the holder on the adhesive pad, push and press the central button until the red warming ring disappears, then it will be stick firmly on the wall.

Attention: the adhesive pad is double side tape, you just need to peel one side to stick on uneven wall, another side DOESN’T need to peel.

Additional information

EAN